Intel SSD Data Center Tool - is a drive management tool for SSDs in the Intel® SSD Data Center Family. It provides the following key features for both SATA- and PCIe*-based Data Center Intel SSDs • Detect PCIe/NVMe- and SATA-based Intel® SSD Data Center devices attached to a host system. • Parse an Intel SSD’s Identify Device information. • Parse an Intel SSD’s SMART (Self-Monitoring and Reporting Technology) information. • Resize the Intel SSD's usable storage capacity by changing its maximum LBA setting. • Update Intel SSD firmware: • The tool carries a firmware payload for all supported drives. • When drive information is displayed, the tool will indicate if a new firmware release is available. • The tool doesn't update firmware on Engineering Sample (ES) drives. • Calculate drive life expectancy (Endurance Analyzer feature). • Enable/Disable Latency Tracking. • Parse read and write commands Latency Tracking logs. • Read and/or modify the SM Bus Address for PCIe NVMe family drives. • Set the Power Governor Mode (vendor unique feature). Three Modes are supported: • 0: 25-watts for PCIe NVMe devices; 40-watts for PCIe NVMe x8 devices; unconstrained for SATA devices • 1: 20-watts for PCIe NVMe devices; 35-watts for PCIe NVMe x8 devices; typical (7-watts) for SATA devices • 2: 10-watts for PCIe NVMe devices; 25-watts for PCIe NVMe x8 devices; low (5-watts) for SATA devices. • The Intel SSD Data Center Tool features a Command Line Interface (CLI) for both Windows* and Linux*. What's New * Click here Title Release: Intel.SSD.Data.Center.Tool.3.0.27 Developer: Home Page License: FreeWare OS: Windows Download: Intel SSD Data Center Tool 3.0.27 x32 (48 MB) Intel SSD Data Center Tool 3.0.27 x64 (49 MB)